100BASE-FX MDAs | Nortel Networks 350 guide

Media Dependent Adapters

The RJ-45 ports are configured as media-dependent interface-crossover (MDI-X) connectors. These ports connect over straight cables to the network interface controller (NIC) card in a node or server, similar to a conventional Ethernet repeater hub. If you are connecting to another Ethernet hub or Ethernet switch, you need a crossover cable unless an MDI connection exists on the associated port of the attached device.

The 400-4TX MDA can operate at either 10 Mb/s or 100 Mb/s. The speed is determined through autonegotiation with its connecting device.

For installation instructions, see “ Installing an MDA” on page B-11.

100BASE-FX MDAs

There are two 100BASE-FX models:

•400-2FX MDA

The 400-2FX MDA uses two longwave 1300 nm SC connectors to attach devices over 62.5/125 micron multimode fiber optic cable.

•400-4FX MDA

The 400-4FX MDA uses four longwave 1300 nm MT-RJ connectors to attach devices over 62.5/125 micron multimode fiber optic cable.

Both models (see Figure B-2) can be used to attach fiber-based 100 Mb/s connections to other compatible Fast Ethernet devices.

Single-mode fiber cable is not supported.

Warning: Fiber optic equipment can emit laser or infrared light that can injure your eyes. Never look into an optical fiber or connector port. Always assume that fiber optic cables are connected to a light source.

Vorsicht: Glasfaserkomponenten können Laserlicht bzw. Infrarotlicht abstrahlen, wodurch Ihre Augen geschädigt werden können. Schauen Sie niemals in einen Glasfaser-LWL oder ein Anschlußteil. Gehen Sie stets davon aus, daß das Glasfaserkabel an eine Lichtquelle angeschlossen ist.

304376-B Rev 00

B-3

Image 209

Nortel Networks 350 manual 100BASE-FX MDAs

Contents

Using the BayStack 10/100/1000 Series Switch Trademarks Copyright 1999 Bay Networks, IncStatement of Conditions USA Requirements Only Canada Requirements Only Japan/Nippon Requirements OnlyBay Networks, Inc. Software License Agreement Voluntary Control Council for Interference Vcci Statement Rev Rev Page Contents Chapter Installing the BayStack 350 Switch Chapter Using the Console Interface Chapter Troubleshooting Appendix B Media Dependent Adapters Page Figures Xiv Figure B-1 Figure B-2 Tables LED Indications During the Software Download Process Before You Begin Preface If you want to Go to OrganizationThis guide has four chapters, six appendixes, and an index Acronyms Text Conventions Related Publications How to Get Help Page Physical Description BayStack 350 10/100/1000 Series Switches Front-Panel Components Front-Panel Uplink/Expansion Slot 10BASE-T/100BASE-TX Port ConnectorsComm Port LED Display Panel Label Type Color State Meaning LED Display Panel LED Descriptions Descriptions of the back-panel components follow the figure Back-Panel Country/Plug description Specifications Typical plug AC Power ReceptacleInternational Power Cord Specifications Cooling Fans Features Telnet Ieee 802.1Q VLANs Ieee 802.1p Prioritizing Igmp Snooping FeatureMultiLink Trunking Port Mirroring Flash Memory Storage BootP Automatic IP Configuration Autosensing and Autonegotiation Snmp MIB Support Configuration and Switch Management Network Configuration BayStack 350-24T Used as a Desktop Switch Desktop Switch Application BayStack 350-24T Used as a Segment Switch Segment Switch Application Configuring Power Workgroups and a Shared Media Hub High-Density Switched Workgroup Application Port-Based Vlan Example Ieee 802.1Q Vlan Workgroups Ieee 802.1Q Tagging Default Vlan Settings 10 .1Q Tagging 1 12 .1Q Tagging 3 Vlans Spanning Multiple 802.1Q Tagged Switches VLANs Spanning Multiple Switches 15. VLANs Spanning Multiple Untagged Switches Vlans Spanning Multiple Untagged Switches 16. Possible Problems with VLANs and Spanning Tree Protocol 17. Multiple VLANs Sharing Resources Shared Servers 18. Vlan Broadcast Domains Within the Switch 19. Default Vlan Configuration Screen Example Default Vlan Configuration screen opens Figure 18 on 21. Default Vlan Port Configuration Screen Example Vlan Workgroup Summary 22. Vlan Port Configuration Screen Example 23. Vlan Configuration Spanning Multiple Switches Vlan Configuration Rules Igmp Snooping 24. IP Multicast Propagation with Igmp Routing 25. BayStack 350-24T Filtering IP Multicast Streams 1 Internet Designated Router Host Membership Query Igmp Snooping Configuration Rules 27. Prioritizing Packets Ieee 802.1p Prioritizing 28. Port Transmit Queue Traffic Class Configuration screen opens Figure To configure the port priority level, follow these steps 30. Setting Port Priority Example Vlan Port Configuration screen opens Figure MultiLink Trunks 31. Switch-to-Switch Trunk Configuration Example 32. Switch-to-Server Trunk Configuration Example Client/Server Configuration Utilizing MultiLink Trunks 33. Client/Server Configuration Example Setting up the Trunk Configuration For S1 Trunk Configuration Screen ExamplesTrunk Configuration Screen for Switch S1 35. MultiLink Trunk Configuration Screen for Switch S1 MultiLink Trunk Configuration screen opens Figure Using the BayStack 350 10/100/1000 Series Switch 36. MultiLink Trunk Configuration Screen for Switch S2 Trunk Configuration Screen for Switch S2 Using the BayStack 350 10/100/1000 Series Switch 37. MultiLink Trunk Configuration Screen for Switch S3 Trunk Configuration Screen for Switch S3 Using the BayStack 350 10/100/1000 Series Switch 38. MultiLink Trunk Configuration Screen for Switch S4 Trunk Configuration Screen for Switch S4 Using the BayStack 350 10/100/1000 Series Switch MultiLink Trunking Configuration Rules Before Configuring Trunks Using the BayStack 350 10/100/1000 Series Switch 39. Path Cost Arbitration Example Spanning Tree Considerations 40. Example 1 Correctly Configured Trunk 41. Example 2 Detecting a Misconfigured Port Additional Tips About the MultiLink Trunking Feature Port Mirroring Conversation Steering 42. Port-Based Mirroring Configuration Example Port-Based Mirroring Configuration BayStack 350 10/100/1000 Series Switches 43. Port Mirroring Port-Based Screen Example Address-Based Mirroring Configuration 44. Address-Based Mirroring Configuration Example 45. Port Mirroring Address-Based Screen Example Port Mirroring Configuration Rules Page Installation Requirements Chapter Installing the BayStack 350 Switch Package Contents Installing the BayStack 350 Switch on a Flat Surface Installation Procedure Attach all devices to the ports Installing the BayStack 350 Switch in a Rack Positioning the Chassis in the Rack Attaching Mounting Brackets Attaching Devices to the BayStack 350 Switch 100 Mb/s Port Connections Connecting the 10BASE-T/100BASE-TX Ports Connecting the Console/Comm Port Connecting to the Console/Comm Port Connecting Power Using the BayStack 350 10/100/1000 Series Switch BayStack 350 Switch AC Power Receptacle Verifying the Installation Stage Description LED indication Verifying the Installation Using the LEDsPower-Up Sequence 10. BayStack 350 Switch Self-Test Screen Verifying the Installation Using the Self-Test Screen 11. Bay Networks Logo Screen Initial Setup of the BayStack 350 Switch Select IP Configuration/Setup or press i from the Main Menu IP Configuration/Setup Screen Installing the BayStack 350 Switch Page Accessing the CI Menus and Screens Chapter Using the Console Interface Navigating the CI Menus and Screens Using the CI Menus and Screens Map of Console Interface Screens Screen Fields and Descriptions Describes the CI main menu options Main MenuConsole Interface Main Menu Options OptionDescription Switch Configuration Option Description System CharacteristicsConfiguration Telnet Configuration Settings Option Description Reset to Default Logout IP Configuration/SetupOption Description IP Configuration/Setup Screen Fields Describes the IP Configuration/Setup screen fieldsConfigurable Field Description Field Description Last BootP Choosing a BootP Request Mode BootP Always BootP When Needed BootP or Last Address BootP Disabled Snmp Configuration Screen Snmp Configuration Snmp Configuration Screen Fields Describes the Snmp Configuration screen fields System Characteristics Screen System Characteristics System Characteristics Screen Fields Describes the System Characteristics screen fields Switch Configuration Menu Screen Switch Configuration Switch Configuration Menu Screen Options Describes the Switch Configuration Menu screen options Option Description Display Port Statistics MAC Address TableClear All Port Statistics Return to Main Menu MAC Address Table Screen Fields Describes the MAC Address Table screen fieldsField Description Aging Time Find an Address Vlan Configuration Menu Vlan Configuration Menu Screen Options Describes the Vlan Configuration Menu screen options Vlan Configuration Screen Vlan Configuration Vlan Configuration Screen Fields Describes the Vlan Configuration screen fields 10. Vlan Port Configuration Screen Vlan Port Configuration Vlan Port Configuration Screen Fields Describes the Vlan Port Configuration screen fields See Assigning Tagging to Gigabit MDA Ports on Field Description Primary Vlan Tagging 11. Vlan Display by Port Screen Vlan Display by Port 10 describes the Vlan Display by Port screen fields Traffic Class ConfigurationVlan Display by Port Screen Fields VLANs Field Description User Priority 11 describes the Traffic Class Configuration screen fieldsTraffic Class Configuration Screen Fields 13. Port Configuration Screen 1 Port Configuration 12 describes the Port Configuration screen fields Gigabit MDA only supports 1000 Mb/s in full-duplex modePort Configuration Screen 2 Port Configuration Screen Fields High Speed Flow Control Configuration Flow Control 13. High Speed Flow Control Configuration Screen FieldsField Description Autonegotiation High Speed Flow Control Configuration Screen Fields Choosing a High Speed Flow Control ModeField Description Preferred Phy Active Phy 16. MultiLink Trunk Configuration Menu Screen MultiLink Trunk Configuration 14. MultiLink Trunk Configuration Menu Screen Options MultiLink Trunk Configuration ScreenOption Description MultiLink Trunk Utilization MultiLink Trunk Configuration Screen Fields 17. MultiLink Trunk Configuration Screen Field Description STP Learning Trunk ModeTrunk Status Trunk Name 18. MultiLink Trunk Utilization Screen 1 MultiLink Trunk Utilization Screen Traffic Type 16 describes the MultiLink Trunk Utilization screen fieldsMultiLink Trunk Utilization Screen Fields 16. MultiLink Trunk Utilization Screen Fields Port Mirroring ConfigurationField Description Last 5 Minutes Last 30 Minutes FieldDescription 17 describes the Port Mirroring Configuration screen fields17. Port Mirroring Configuration Screen Fields Field Description Monitor Port Port Mirroring Configuration Screen FieldsPort Y Address a Fields Description Monitoring Modes 21. Rate Limiting Configuration Screen 1 Rate Limiting Configuration 22. Rate Limiting Configuration Screen 2 Rate Limiting Configuration Screen Fields 19 describes the Rate Limiting Configuration screen fieldsPacket Type Limit 20 describes the Igmp Configuration screen fields Igmp Configuration Snooping Igmp Configuration Screen FieldsProxy Robust Value Field Description Query Time 24. Port Statistics Screen Port Statistics Port Statistics Screen Fields 21 describes the Port Statistics screen fields Oversized Packets Field Description Undersized PacketsCollisions Single Collisions 21. Port Statistics Screen Fields Console/Comm Port Configuration 25. Console/Comm Port Configuration Screen Comm Port Parity 22. Console/Comm Port Configuration Screen Fields Required for Both Any Ascii string of up to 15 printable characters Spanning Tree Configuration 23. Spanning Tree Configuration Menu Screen Options 26. Spanning Tree Configuration Menu Screen 27. Spanning Tree Port Configuration Screen 1 Spanning Tree Port Configuration Spanning Tree Port Configuration Screen Fields 28. Spanning Tree Port Configuration Screen 2 Path Cost Field Description ParticipationPriority 29. Spanning Tree Switch Settings Screen Display Spanning Tree Switch Settings Parameter Description 25 describes the Spanning Tree Switch Settings parameters25. Spanning Tree Switch Settings Parameters Delay Parameter Description Forward DelayBridge Hello Time 26 describes the Telnet Configuration screen fields Telnet Configuration Inactivity Timeout Event Logging 26. Telnet Configuration Screen Fields Field Description Allowed Source Telnet Configuration Screen FieldsIP Address Mask Software Download 31. Software Download Screen LED Indications During the Download Process 27 describes the Software Download screen fields27. Software Download Screen Fields Tftp Server IP Address 28. LED Indications During the Software Download Process Phase Description LED indications 32. Event Log Screen Display Event Log Write Threshold Excessive Bad Entries 34. Sample Event Log Entry Exceeding the Write Threshold Flash Update 36. Self-Test Screen After Resetting the Switch Reset 37. Bay Networks Logo Screen Reset to Default Settings Using the Console Interface Using the BayStack 350 10/100/1000 Series Switch Using the Console Interface Logout 40. Password Prompt Screen Chapter Troubleshooting LED Indications BayStack 350 Switch LED Locations Troubleshooting Diagnosing and Correcting the Problem A normal power-up sequence, the LEDs appear as follows Normal Power-Up SequenceSymptom Probable cause Corrective action Corrective Actions Autonegotiation Modes Port Connection Problems Port Interface Page Environmental Parameter Operating Specification Storage SpecificationElectrical Parameter Model 350-24T Model 350-12T Performance Specifications Physical DimensionsNetwork Protocol and Standards Compatibility Data Rate Interface Options Safety Agency CertificationElectromagnetic Emissions Electromagnetic Immunity Declaration of Conformity Type Model/Description See Appendix B Media Dependent Adapters Label Description 10BASE-T/100BASE-TX MDA 100BASE-FX MDAs Using the BayStack 350 10/100/1000 Series Switch Table B-2 100BASE-FX MDA Components Figure B-2 BASE-FX MDA Front Panels Item Label Description 1000BASE-SX MDAsTable B-2 BASE-FX MDA Components BASE-SX MDA Components Item Label Description Figure B-3 BASE-SX MDA Front Panels 1000BASE-LX MDAs Table B-3 BASE-LX MDA Components Figure B-4 BASE-LX MDA Front Panels 1000BASE-LX Multimode Applications Figure B-5. Installing an MDA Installing an MDA Loosen the thumbscrews and remove the MDA Remove the AC power cord from the power sourceReplacing an MDA with a Different Model To learn more about Refer to this section Appendix C Quick Steps to Features Figure C-1. Configuring 802.1Q VLANs 1 Configuring 802.1Q VLANs Figure C-2. Configuring 802.1Q VLANs 2 Figure C-3. Configuring 802.1Q VLANs 3 Figure C-4. Configuring MultiLink Trunks Configuring MultiLink Trunks Figure C-5. Configuring Port Mirroring 1 Configuring Port Mirroring Figure C-6. Configuring Port Mirroring 2 Figure C-7. Configuring Igmp Snooping 1 Configuring Igmp Snooping Figure C-8. Configuring Igmp Snooping 2 Figure C-9. Configuring Igmp Snooping 3 Figure D-1. RJ-45 8-Pin Modular Port Connector RJ-45 10BASE-T/100BASE-TX Port Connectors MDI and MDI-X Devices Table D-1 RJ-45 Port Connector Pin AssignmentsPin Signal Description Figure D-2. MDI-X to MDI Cable Connections MDI-X to MDI Cable Connections Figure D-3 MDI-X to MDI-X Cable Connections MDI-X to MDI-X Cable Connections Table D-2 DB-9 Console/Comm Port Connector Pin Assignments DB-9 RS-232-D Console/Comm Port ConnectorPage Field Default setting Appears in this CI screen Appendix E Default Settings Port # port number Default Settings Using the BayStack 350 10/100/1000 Series Switch Default Settings Page Appendix F Sample BootP Configuration File Using the BayStack 350 10/100/1000 Series Switch Index Index-2 Index-3 Index-4 Index-5 Index-6