TANDBERG 5000 user manual Video output

Advanced use VISION 5000 Videoconferencing System

Video output

========== Video Output ==========

Auto-PIP:	Off	On
Still Image Filter:	Off	On
Auto-Display Still Image:	Off	On
Dual Monitor:	Off	On
Output 1-3:
Interlaced
Non-Interl.
Output 4-5:
Interlaced
Non-Interl.
Previous Menu

Auto-PIP

Select On to automatically display a PIP whenever the camera position or video source is changed and to have the remote site appear in PIP when in full screen selfview.

Still image filter

Select On to remove any instability in the high quality still image.

Auto-display still image

Select On to automatically display a received still image. If this selection is Off, you will have to press and 0 to display a still image.

VIDEO

SOURCE

Dual Monitor

Select On to show selfview and still images on the 2nd monitor. Toggle with SELFVIEW. If Off, the 2nd monitor shows selfview only. See section ‘Sending/receiving graphics’ for further information.

Output

If your external equipment requires an interlaced signal you can select it here. Outputs 1-3 provide the same signal as your main monitor. Outputs 4-5 provide the selfview/still image signal used on the 2nd monitor.

62