TANDBERG 5000 Sending/receiving graphics, Sending a still image, Requesting a still image

VISION 5000 Videoconferencing System General use

Sending/receiving graphics

When a still image is sent, received or requested, it will be stored in the graphics memory.

One high-quality image (4xCIF) can be stored in memory. When a new image is sent or received, the old image will be overwritten.

Sending a still image

• Press	GRAPHICS	. The outgoing video is frozen when ‘Freeze’ is displayed on the screen. The video remains
	FREEZE
		GRAPHICS	is pressed again (not if calling to a dual monitor system).
frozen until the key FREEZE

Note

If a still image from another video source is sent, please check your ‘Presentation Settings’. See below.

Dual Monitor

Using a dual monitor system and with ‘Dual Monitor: On’ selected in the Video Output menu, the still image is automatically shown on the dual monitor until SELFVIEW is pressed. UseSELFVIEWto toggle between selfview and still image on the dual monitor.

VIDEO	UP and DOWN
• To send a still image from another video source (e.g. the document camera), press SOURCE , use

GRAPHICS

to highlight the video source and press FREEZE . See ‘Presentation Settings’ below for automatic setup of

this operation.

Requesting a still image

FAR END

Press CAMERA until the ‘FarEndCamera’ on screen indicator is displayed.

GRAPHICS

• Press FREEZE . The still image is automatically displayed, press any key to return to normal view (single monitor).

Dual Monitor

UseSELFVIEWto toggle between selfview and still image on the dual monitor.

VIDEO	UP and DOWN to highlight the video
• To request a still image from another video source, press SOURCE , use

GRAPHICS

source and press FREEZE .

33