TANDBERG 5000 user manual Correcting keying mistakes, Last number redial/using the call directory

VISION 5000 Videoconferencing System		Getting started
Accept/end call
SEND	ACCEPT
To answer a call, press the	or the END CALL key. Manual answer of a call is needed if the autoanswer facility
is switched off. See ‘Utilities’	in ‘Advanced use’.

ACCEPT

To end a call, press the END CALL key.

Correcting keying mistakes

To delete the last digit (or character) entered, press the DELETE key.

Last number redial/using the call directory

To get access to your list of pre-stored numbers (up to 99 entries) and the last number dialled, press the

DIRECTORY key.

To select a number from the list, type the two-digit entry number or use UP and DOWN to move up/down, or press LEFT and RIGHT to move one page up/down.

To dial the selected number press SEND .

Example: You wish to dial the number stored at entry number 03. Press DIRECTORY + 03 and SEND .

If you want to make changes to the number before dialling, press OK instead of SEND .

To program numbers and edit your directory list, see ‘Edit Directory’ in ‘Advanced use’.

27