TANDBERG D1459501 Shutting down and restarting the Content Server, Server modes, Error states

Shutting down and restarting the Content Server

The Content Server can be shut down using the LCD panel. TANDBERG recommends that you end all calls on the Content Server before you shut down; otherwise the conferences may fail.

Note: If calls are in progress when the shut down occurs, the recorded conferences appear in the Recorded conferences list but may be unusable. They can be deleted in the normal way.

LCD status display and button functions

online

The Content Server is ready to accept calls and transcode outputs but none are currently in progress.

1-5 calls	Calls are in progress on the Content Server.
transcoding	The Content Server is transcoding.
Server modes
config reload	The Content Server is in Reloading Configurations mode. In Reloading
	Configurations mode, the Content Server does not accept new calls.
1-5 calls (cnfg)	Calls are in progress and the Content Server is in Reloading Configurations mode.
trans (cnfg)	The Content Server is transcoding and is in Reloading Configurations mode.
idle	The TCS Wizard is running. In Idle mode, the Content Server does not accept new
	calls or process new transcoding jobs.
1-5 calls (idle)	The TCS Wizard has started while there is a call in progress.
trans (idle)	The TCS Wizard has started while there is a transcoding process in progress.
maintenance	The Content Server is in a cluster and has been set to Maintenance mode. The
	Content Server will not accept new calls or process new transcoding jobs.
1-5 calls (maint)	Calls are in progress and the Content Server is in Maintenance mode.
trans (maint)	The Content Server is transcoding and is in Maintenance mode.
upgrading	This Content Server, or a Content Server in the cluster, is being upgraded.
Error states
Error	The Content Server is out of disk space or has lost connection to the NAS.
No network	The Content Server has no connection to the network.
Buttons
	Enters Edit mode, confirms an entry.
	Returns to the previous menu, exits Edit mode without saving.
	Moves between menu items, moves between values in a numerical address and
and	modifies numerical values.

TANDBERG Content Server printable online help 107