Restarting the Content Server
1.Make sure that the Content Server is not recording or transcoding; that is, the LCD displays online.
2.Press 
to display the LCD's main menu.
3.Go to Commands > Restart.
4.Select Yes to confirm.
You see the message 'Restarting' on the LCD.
You can also restart the Content Server from the Windows Server administration interface: go to Maintenance > Shutdown > Restart.
Shutting down
1.Make sure that the Content Server is not recording or transcoding; that is, the LCD displays online.
2.Press 
to display the LCD's main menu.
3.Go to Commands > Shutdown.
4.Select Yes to confirm.
5.The Content Server shuts down. When you see the message 'Power off' on the LCD or when the LAN1 and HDD LEDs stop blinking, you can turn off the power using the switch at the back of the unit.
TANDBERG Content Server printable online help | 108 |
