Operating the Equipment Locally
Page 4-24 Instruction Manual: evolution 5000 E57xx DSNG and DENG Voyager Encoder
ST.TM.E10076.3
Table 4.10: Audio AC-3 Descriptor Options
Selected Option Description
DVB & ATSC Both the ATSC and DVB descriptors are used with the audio streams.
DVB only Only the DVB descriptors are used with the audio streams.
ATSC only Only the ATSC descriptors are used with the audio streams.

Logical Chan Desc Option

To access the Logical Chan Desc option, press the Logical Chan Desc
softkey in the Service Info Menu. This enables the L ogical Channel
Descriptor to be turned On or Off. The information is included in the NIT
(for Australia mainly) .

Logical Channel Option

NOTE…
This option is only shown if the Logical Chan Desc option is set to On.
To access the Logical Channel option, press the Logical Channel softkey
in the Service Info Menu. This enables a number to be given to the
Logical Channel.
4.7.4 Remote Control Menu
Overview
The Remote Control Menu is selected from the System Menu by pressing
the Remote Control softkey. This menu provides options for amending
the remote control options. See Figure 4.9 for the Remote Control Menu
structure.

IP Address Option

To access the IP Address option, press the IP Address softkey in the
Remote Control Menu.

MAC Address Option

The MAC Address option is found in the Remote Control Menu. It cannot
be changed.

Network Mask Option

To access the Network Mask option, press the Network Mask softkey in
the Remote Control Menu.

Gateway Address Option

To access the Gateway Address option, press the Gateway Address
softkey in the Remote Control Menu. This gives the default gateway
address used on the Ethernet network interface connected via the 10BaseT
socket. Any communications to network hosts not on the local IP network
will be sent to this addr ess.