Tascam LR-10 ªªConnect an instrument, ªªConnect headphones or speakers, Quick Start Guide, Step 5: Tune the instrument, Step 4: Connect an instrument and headphones, TUNER

For details, see “Setting the input functions” on page 48.

Step 4: Connect an instrument and headphones

ªªConnect an instrument

Connect the headphones/stereo line output jack of the keyboard or other instrument to the LINE IN jack of this unit using a 3.5-mm miniplug cable.

For details, see “Connecting an instrument” on page 47.

CAUTION

To record the sound from the LINE IN jack or hear it through

headphones, line input must be ON (). If mic input is activated, set the INPUTitem in the INPUT SETTINGmenu

to LINE. If the line input is OFF (), press the ¶/MIC

button to turn it ON ().

Quick Start Guide

ªªConnect headphones or speakers

Connect headphones or a monitoring system (such as powered speakers or an amplifier and speakers) to this unit’s /LINE OUT jack.

For details, see “Connecting monitoring equipment” on page 46.

CAUTION

Before connecting headphones, use the OUTPUT (–) button to minimize the volume. Failure to do so could cause the sudden output of loud sounds, which might lead to hearing damage or other harm.

Step 5: Tune the instrument

Use the unit’s tuning function to tune an instrument using the LINE IN jack or built-in microphones.

Press the TUNER button to open the TUNERscreen.

For details, see Chapter 13 “Using the tuner” on page 80.

TASCAM LR-10 13