5–Recording

 

 

 

 

 

 

 

 

 

 

The factory default setting is MID.

 

 

 

 

 

 

 

 

 

 

 

NOTE

 

 

 

 

 

Change it to HIGHif the input level is too low and to LOWif

••

Try using one of the low cut filter settings when recording

the input level is too high.

 

 

 

 

outdoors or another place where the unwanted sound of

TYPE:

 

STEREO

 

MONO

 

wind is being recorded.

Set the built-in microphones to

or

••

When recording live performances and in other situa-

 

. The

tions where unexpected loud sounds might occur, set

factory setting is

STEREO

 

 

 

 

.

 

 

 

 

this function to LMTto prevent input clipping and allow

If you select MONO, the left and right channels are

 

 

recording without distortion.

combined into the same signal.

 

 

 

 

 

 

 

 

Use the LR-10’s built-in effects as necessary on the input

LOW CUT:

 

 

 

 

••

 

 

 

 

 

source signal. (See “Using the built-in effects” on page 78.)

The factory default setting of the low cut filter is OFF, but

 

 

 

 

 

 

 

 

you can also select 40Hz, 80Hzor 120Hzas the cut-off

 

 

 

 

 

 

 

Adjusting the input level

frequency for a low cut filter.

 

 

 

LEVEL CTRL:

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

You can adjust the level of the mic/line input.

Use this to set the level control function.

 

 

 

 

Use the INPUT volume control on the right side panel to

Set it to AUTOto have the LR-10 automatically adjust the

adjust the input level of the built-in microphones or the LINE

input gain according to the input level. Loud sounds and

IN jack.

quiet sounds are both adjusted to the same level.

 

 

 

 

 

 

 

Set it to LMTto have the LR-10 automatically limit the

 

 

 

 

 

 

 

input gain so that input level of loud sounds is reduced to

 

 

 

 

 

 

 

prevent distortion.

 

 

 

 

 

 

 

 

 

 

The factory default setting is OFF.

 

 

 

 

 

 

 

 

 

3 Press the HOME button to return to the Home Screen.

 

 

 

 

 

 

 

TASCAM LR-10 49