Tascam LR-10 Turning loop playback on and off, 10–LoopPlayback/Repeat Playback/Single Track Playback, [ª], NOTE, HOME, NOTE, LOOP, pop-up, Use the Á, Ô

10–Loop Playback/Repeat Playback/Single Track Playback

2.Press and hold the LOOP button to open the LOOPSET pop-up.

3.Use the Á, Ô, and [ª] buttons to move the IN (starting) point to the desired position. Press the Âbutton to save the IN (starting) point.

NOTE

•• When the LOOP SETpop-up window is open, press the Á

button to playback, press [ª]button to, and press the

Ôor  button briefly to search the file.

•• Press and hold the Ô or  button to move the IN (starting) or OUT (ending) point. (This is not possible when there is no IN (starting) and OUT (ending) point.)

•• Press the [ª] button during playback to pause, and

press the HOME button when paused to returned to the Home Screen.

4.Next, use the same buttons to move the OUT (ending) point to the desired position, and press the ¯button to save the OUT (ending) point.

NOTE

Use the  and ¯ buttons to switch between IN (starting) and OUT (ending) points.

5. Press the LOOP button briefly to start loop playback.

Turning loop playback on and off

Press the LOOP button briefly to turn loop playback ON or OFF.

74TASCAM LR-10