10–Loop Playback/Repeat Playback/Single Track Playback

NOTE

•• When the LOOP SETpop-up window is open, press the Á

button to playback, press

 

[ª]button to, and press the

 

Ôor button briefly to search the file.

••

Press and hold the Ô or button to move the IN

 

(starting) or OUT (ending) point. (This is not possible when

 

there is no IN (starting) and OUT (ending) point.)

••

Press the

 

[ª] button during playback to pause, and

 

 

press the HOME button when paused to returned to the

Home Screen.

5.Next, use the same buttons to move the OUT (ending) point to the desired position, and press the ¯ button to save the OUT (ending) point.

NOTE

•• Use the  and ¯ buttons to switch between IN (starting) and OUT (ending) points.

6. Press the LOOP button briefly to start loop playback.Using loop playback with the playlist

When the playback area is set to playlist, up to 5 loops with distinct IN (starting) and OUT (ending) points can be set per file.

Follow the procedures below to set and play back loops of desired intervals in a file.

Loop settings for a file are saved until it is removed from the playlist.

1.Press the LOOP button to show the LOOP setting area at the bottom of the display. The word LOOPis followed by a number. Use the VALUE (+/–) buttons to set the number to 1–5.

TASCAM LR-10 73