Use the VALUE (+/–) buttons to change the setting value. For details, see “Changing the speed” on page 70.

Step 9: Record your performance

You can record the sound input through the built-in microphones or the LINE IN jack. Press the RECORD [–] button to start recording (except when the auto-record function is on and the input level is below the set value). Press and hold the RECORD [–] button to enable the pre-record function and put the unit into recording standby. Press the RECORD [–] button to start recording, capturing sound up

to 2 seconds before pressing the button. Press the [ª] button to stop recording.

For details, see “Recording” on page 50.

Quick Start Guide

Step 10: Record over a song (overdub)

You can also record your performance together with the music that is playing back.

Use the  and ¯ buttons to select the song. Press the Á button while pressing and holding the RECORD [–] button to begin overdubbing.

Press the [ª] button to stop recording.

For details, see “Recording the input sound with the playback sound (overdubbing)” on page 51.

CAUTION

If you press and hold the record button, the unit will be put in recording standby with the pre-record function enabled, and overdubbing will not be possible.

TASCAM LR-10 17