Tascam LR-10 Changing the key, Changing the speed, KEY, KEY

9–Special Playback (playback control function)

Using this unit’s playback control functions, you can change the speed of playback without changing the pitch and vice versa. You can use these playback control functions for effective practice and learning new parts.

Changing the speed

You can use the SPEED function to set the playback speed. This unit has a Variable Speed Audition (VSA) function, so even when playback speed is changed the pitch stays the same.

Press the SPEED button to show the SPEED setting area at the bottom of the Home Screen.

Use the VALUE (+/–) buttons to set the playback speed.

The speed can be set in a range between 50% (x0.5) and 150% (x1.5) of the original speed in 10% increments (default value: x1.0).

When the SPEEDis set from x0.5–x0.9, the icon is

shown, and when it is set from x1.1–x1.5, the icon is shown.

Changing the key

You can use the KEY function to change the pitch of playback in semitone intervals (and the FINE TUNE function to change it in cents) without changing the speed.

Press the KEY button to show the KEYsetting area at the bottom of the Home Screen on the display. Press the KEY button again to show the FINETUNEsetting area.

KEY can be set in a range of ±6 semitones (â6–ã6). (The default value is 0.)

If you change the key to any value besides 0, the key change

function turns ON and the KEY icon ( ) appears on the Home Screen as light letters on a dark background.

70TASCAM LR-10