Tascam LR-10 Overdubbing, TIP, MIC, NOTE, RECORD, CAUTION, Use the Âbutton, ¯ button or the

5–Recording

TIP

Using the overdubbing function, you can record over the same file multiple times, allowing you to use this unit as a simple multitrack recorder.

Overdubbing

1.Use the Âbutton, ¯ button or the BROWSEscreen to select the file that you want to overdub.

2.Press the Á button to start playback and begin playing the instrument. Check the balance between the levels of the playback and instrument sounds.

3.Use the INPUT volume to adjust the input volume level so that the PEAK indicator does not light. Press the BALANCE button to show the BALANCE item, and use the VALUE (+/–) buttons to adjust the level of the playback sound. The range is from “0” (minimum) to “20” (maximum), and the default value is “20”.

NOTE

The BALANCEsetting only affects the volume when MIC or

LINE is ON ( or ). When MIC or LINE is OFF ( or ), changing the BALANCEvalue has no effect on the

volume.

4.Press the Á button while pressing and holding the RECORD [º] button to begin overdubbing.

CAUTION

If you press and hold the RECORD [º] button long , the unit will be put in recording standby with the pre-record function enabled, and overdubbing will not be possible.

5.When overdubbing starts, the RECORD [º] button indicator lights, and the elapsed and remaining recording times are shown on the recording screen. In addition, the name of the file being played back is shown next to the play icon and above the name of the file being recorded.

If no file that can be played back has been selected, the following pop-up message appears.

52TASCAM LR-10