Tascam LR-10 Manual track incrementation during recording, 5–Recording, Track incrementation, TIP, NOTE, RECORD, CAUTION, CAUTION, You can press the

5–Recording

Recording starts automatically when the input signal level exceeds the detection level set using the STARTLEVEL item.

Recording stops automatically and the unit returns to recording standby when the input signal level stays below the detection level set using the STARTLEVELitem for five or more seconds and RECORD [º] indicator blinks.

TIP

Use this function in combination with the pre-recording function to record without missing the beginning of a performance.

NOTE

When AUTORECis ON, unlike usual, pressing the RECORD [º] button briefly does not start recording, but does put the unit into recording standby.

9.You can press the [ª] button if you want to stop a recording that has started automatically.

CAUTION

When overdubbing, the auto-recording function cannot be used.

Track incrementation

You can start recording to a new file without interruption manually. If a file reaches the maximum size (2GB), the unit will also automatically start recording to a new file. In both cases, the original file is saved and no gap occurs in the recording.

Manual track incrementation during recording

At any time during recording, you can manually start a new file and continue recording easily.

1. Press the ¯button during recording.

	CAUTION
••	A new file cannot be created if the total number of files and
	folders would exceed 5000.
••	Files shorter than two seconds cannot be created.
••	If the name of a newly created file would be the same as
	that of an existing file, the number at the end of the name
	is increased to give the new file a unique name.
••	When overdubbing, the track incrementation function
	cannot be used.

54TASCAM LR-10