Tascam LR-10 ªªAdjusting the mix, ªªUse repeat playback, Quick Start Guide, Step 8: Play along with the music, MIC, NOTE, LOOP, LOOP, LOOP, VALUE, BALANCE, LINE IN, LINE IN

For details, see “Adjusting the input level” on page 49.

ªªAdjusting the mix

Press the BALANCE button to adjust the volume of the file that is playing. Use this function to adjust the balance between the playback sound and the sound of the input from the built-in microphones or the LINE IN jack. Press the Á button to start playback of the song. Adjust the volume of the playback sound using the VALUE (+/–) buttons. While playing the instrument, adjust the balance between the playing song and the instruments.

NOTE

The BALANCEsetting only affects the volume when MIC or

LINE is ON ( or ). When MIC or LINE is OFF ( or ), changing the BALANCEvalue has no effect on the

volume.

Quick Start Guide

Step 8: Play along with the music

This unit will output the sound input through the mic or the LINE IN jack even when recording is not enabled. This allows you to select a song and play along after pressing the Á button.

This unit also has the following functions, which you can use as you like to make practicing your instrument even easier.

ªªUse repeat playback

You can use two types of repeat playback. You can either play a loop between two set points or play an entire song and the entire playback area repeatedly.

Use the LOOP button for loop playback, which is useful for practicing a phrase repeatedly.

During playback (or when paused), press the LOOP button briefly at the point where you want to start loop playback to set the IN point. Then, press the LOOP button briefly again at the point where you want to stop loop playback to set the OUT point and start loop playback of the interval between the points.

TASCAM LR-10 15