Remove and Replace
6-12 WFM90D and WFM91D Service Manual
Openslide
latchconnector
toinstall cable.
Closelatch connector
Contacts
Contacts
Figure 6- 4: Installing the LCD display cab le
2. If you arereplacing the ribbon cable, set the LCD display just above its
resting position on the locating feet. Use your fingerto creasethe ribbon
cable so thatwhen the LCD display is set down on the locating feet, the
ribbon cable does not raisethe LC D display up offof the locating feet.
3. Set the LCD display module onto the four locating feet. The locating feet fit
into small holes in each of the four corners on the back of the LCD display.
See Figure 6--5.