Remove and Replace
WFM90D and WFM91D ServiceManual 6-35
Remove. Toremove the battery orientation marker and/or the battery cushion
pad:
1. Remove the battery cover.Refer to Battery Cover on page 6--25.
2. Toonly remove the battery orientation marker, pry it up around the edges
and peel it offof the battery cushion pad on the bottom cover.
3. Toremove both the battery orientation marker and the battery cushion pad,
pry the batterycushion pad up around the edges, and peel it off of the bottom
cover.
4. If necessary,clean the surface of the battery cushion pad or the bottom cover
to remove any remainingglue residue. Refer to Cleaning on page 6--1.
Replace. Toreplace the battery orientation marker and/or the battery cushion
pad:
1. Toreplace the battery cushion pad and the battery orientation marker,peel
offthe protective covering of the adhesive surface of the battery cushion pad.
2. Position the battery cushion pad above the bottom cover.See Figure 6--17.
3. Press the pad onto the bottom cover and rub the pad to make sure the it is
securely in place.
4. Peel offthe protective covering of the adhesive surface of the battery
orientation marker.
5. Position the battery orientationmarker above the battery cushion pad. See
Figure 6--17.
6. Press the markeronto the battery cushion pad and rub the marker to make
sure it is securely in place.
7. Install the batterycover. Refer to Battery Cover on page 6--25.
Battery Orientation Marker
andBat tery Cushion Pad