Remove and Replace
WFM90D and WFM91D ServiceManual 6-27
Bushing
Bushing
Turnlock
Batterycover
Figure6 -12: Removal and replacement of t he turnlock stud
Replace. Toreplace the turnlock stud and bushing:
1. Press the turnlockstud into the bushing.
2. Toinstall the turnlock stud and bushing into the battery cover, press firmly
on the turnlock stud head.B esure to keep the bushing head level with the
battery coverwhile you press on the turnlock stud. The bushing will snap
into place whenit is correctly installed.
3. Install the batterycover. Refer to Battery Cover on page 6--25.