Using the Menus
WFM90D and WFM91D ServiceManual 2-21
ConfigurationMenu
The following pagesdescribe the instrument configuration menu, shown in
Figure 2--12on page 2--22.Menu categories and functions are described in
Table2--7.
Toenter the Configuration menu, press the CONFIG button.
Toexit the configuration menu, press the CONFIG button again.
Press the bezel button that corresponds to the desired selectionon the display.
When you make a selection, changesare displayed immediately.
Configuration menu categoriesare displayed above the left bezel button. The
selectedcategory is highlighted. To scroll through the menu categories, press the
left bezel button or press the Yand Bbuttons.
Menu selections within the selectedcategory appear over the right three Bezel
Buttons.
Toadjust values, press the two right bezel buttons while displaying a menu
selection suchas BTRACE ADJUS T Y.
NOTE. If you adjust picturehue and/or color,the only way to ensure that the hue
and color have been correctlyreset is to recall the factory default settings
throughC onfiguration PRESETS.

Configuration Menu

Access

Using the Configuration

Menu