Remove and Replace
6-32 WFM90D and WFM91D Service Manual
Replace. Toreplace the battery power connector:
1. Solder the battery powerconnector wires to the battery contacts. See
Figure 6--16.
2. Install the bottom cover.Refer to Bottom Cover on page 6--31.
Remove. Toremove the battery contacts:
1. Remove the bottom cover.Refer to Bottom Cover on page 6--31.
2. Toremove one of the battery contacts that has the battery power connector
soldered to it, unsolder the battery connectorwire before you remove the
battery contact.
3. Pry the batterycontact past the retaining lip on the bottom cover. See
Figure 6--15.
Alignmentridge
Retaininglip
Batterycontacts
Figure6 -15: Battery cont act installationalignment
4. Push the battery contactthrough the slot on the bottom cover.
Battery Contacts