Using the Menus
WFM90D and WFM91D ServiceManual 2-19
Press the AUDIO button andthe MENU button to open the Audio operating
menu. There is no digital menu for audio. For more details on menu access, see
page 2--17.
Audio menu choicesare shown in Table 2--3.The Audio menu tree is shown in
Figure 2--10.
Table2- 4: Audio menu choices
Submenu Function
REFERENCE
dBu
Sets the Audio reference level to MIC, --10, 0, 4, or 8. The reference levels
aremeasured in dBu, andt he MIC level is for testing microphones.
HEADROOM Sets the headroom reference level to --3dB or +10 dB. Use the +10 dB
setting for viewing signal levels greater than 3 dB over the reference level.
Press the PIX button and theMENU button to open the Picture operating menu.
Hold the MENU button in for two secondsto open the digital menu. For more
details on menu access, see page 2--17.
Picture menu choicesare shown in Table 2--5. The Picture menu treeis shown in
Figure 2--10.
Table2- 5: Picture menu choices, analog and digital
Submenu Digital only Function
ACTION WFM90D only.Turns the Safe Action area markers on
andoff.
TITLE WFM90D only.Turns the Safe Title area markers on and
off.
SAFEAREA WFM91D only.Turns the Safe Area markers on and off.
VSHIFT Turnsthe vertical shift on and off. The vertical shift allows
yout o view the vertical interval on the Picture display.
Theverti cal interval display does not appear on the
VIDEO OUT signal.
EDHRPRT nEnable or disable the EDH reporting readout at the top
centerof the display in Waveform and Vectorm odes.
CRCW TCH nCRCWatch. Enable ordi sable the CRC reporting
readouton t he right side of the display in Waveform and
Vectormodes.
Audio MenuPicture Menu