Model 9060Z Manual
Copyright TELEDYNE ANALYTICAL INSTRUMENTS — 2012
This manual describes the transmitter firmware version 1.24, September 2012
Neither the whole nor any part of the information contained in, or the product described in, this manual may be adapted or reproduced in any material form except with the prior written approval of Teledyne Analytical Instruments.
The product described in this manual and products for use with it are subject to continuous developments and improvement. All information of a technical nature and particulars of the product and its use (including the information in this manual) are given by Teledyne Analytical Instruments in good faith. However, it is acknowledged that there may be errors or omissions in this manual. A list of details of any amendments or revisions to this manual can be obtained upon request from Teledyne Analytical Instruments. Teledyne Analytical Instruments welcome comments and suggestions relating to the product and this manual.
All correspondence should be addressed to: ‐
Teledyne Analytical Instruments 16830 Chestnut Street
City of Industry, CA 91748
Phone (626) 934‐1500 or (888) 789‐8168
Fax (626) 934‐1651
Email: ask_tai@teledyne.com
www.teledyne‐ai.com
Teledyne Analytical Instruments or their authorised dealers should carry out all maintenance and service on the product. Teledyne Analytical Instruments can accept no liability whatsoever for any loss or damage caused by service or maintenance by unauthorised personnel. This manual is intended only to assist the reader in the use of the product, and therefore Teledyne Analytical Instruments shall not be liable for any loss or damage whatsoever arising from the use of any information or particulars in, or any error or omission in, this manual, or any incorrect use of the product.
5
