Model 9060Z Manual
7. COMMISSIONING MODE
This chapter describes the functions available when the COMMISSIONING mode is entered on the transmitter.
The COMMISSIONING mode is accessed by pressing and holding the SETUP key for approximately 2 seconds until the words “Commissioning Menu” appears at the bottom of the display. The transmitter will return to the RUN mode when the SETUP key is pressed again or 60 seconds after the last key press.
Changing options in the COMMISSIONING mode is the same as the SETUP mode. See chapter 6.2, Changing Options.
7.1 FUNCTION SUMMARY TABLE
When the transmitter is in the COMMISSIONING mode the SETUP light will be on and the words “Commissioning Menu” will be shown the bottom of the display.
The following table shows the COMMISSIONING menu functions:
34
