1. Overview
5.Press the [SCAN!] button.
6.If the “To continue, place document on glass. And press Scan!” message is displayed, place another original on glass and press [SCAN!] to scan another original, or press the [JOB FINISH] button to finish scanning.
•When the original is set on the reversing automatic document feeder, this screen is not displayed. However, this screen is displayed when you press the [CONTINUE] button during scanning the originals.
•If you want to cancel the storage of the scanned data, press the [JOB CAN- CEL] button.
•You can change the setting of the original type and scanning conditions, using the [EDIT] button before pressing the [SCAN!] button.
Scanning Procedure for Multiple Agents
1.Place the original(s).
•For instruction about placing the originals, see Operator’s Manual for Basic Function.
14 | Scanning Guide — How to Perform Scan Operations |
