1 TROUBLESHOOTING FOR THE HARDWARE

32 Remove the jammed paper.

33 Close the paper exit cover of the saddle stitch unit and the lower cover of the Saddle Stitch Finisher.

34 Connect the finisher to the equipment.

Connect the finisher with the equipment while pressing the lock lever. Place your hand on portion A in the figure and then move the finisher carefully.

Be careful not to let your fingers be caught between the finisher and the equipment.

A

„Paper jam inside of the equipment

Be careful not to let your fingers be caught between the equipment and the External Large Capacity Feeder.

1 Separate the External Large Capacity Feeder (optional) from the equipment when the External Large Capacity Feeder is attached.

Move it slowly while pushing the lock lever.

2 Open the paper feed cover.

22 Clearing a Paper Jam

Page 24
Image 24
Toshiba 855, 755, 655, 555 manual „ Paper jam inside of the equipment, Open the paper feed cover