1 TROUBLESHOOTING FOR THE HARDWARE

5

6

7

Pull out the seal bundling the staples straight.

Fit the staple cartridge into the stapler.

Insert the cartridge until the lever of the stapler goes up to be fixed securely.

Close the front cover of the finisher.

If the message “Check staple cartridge” remains, repeat the procedure above from steps 1 to 7.

„Refilling Saddle Stitch Finisher MJ-1029 staples

The Saddle Stitch Finisher MJ-1029 has two types of staple cartridges; one is for 100-sheet staples and the other is for 50-sheet ones. If you replace the staple cartridge with the other type, turn the power of the equipment OFF and then back ON after replacing it.

1 Open the front cover of the finisher.

2 Slightly raise and pull out the staple cartridge while holding its lever.

1

2

Refilling With Staples 43

Page 45
Image 45
Toshiba 755, 855, 655, 555 manual „ Refilling Saddle Stitch Finisher MJ-1029 staples, Close the front cover of the finisher