1 TROUBLESHOOTING FOR THE HARDWARE

6 Remove the jammed staples.

Do not touch the stapling area (A in the figure).

The actual needle point could cause you personal injury.

7 Push the knob (2) to return it to its original position. Make sure that the lever (1) is latched on the shutter.

 

A

2

1

8 Fit the staple cartridges.

Push down each cartridge until it is fixed with a click.

9 Unlock the stapler by pulling its handle toward you. Then return the stapler to its original position.

10 Carefully insert the saddle stitch unit into the finisher.

2

1

11 Make sure of the following two requirements before test stapling: y The Saddle Stitch Finisher is securely attached to the equipment.

y A3, B4, A4-R, LD, or LT-R paper is set in the drawer.

Clearing a Staple Jam 35

Page 37
Image 37
Toshiba 755, 855, 655, 555 manual Remove the jammed staples, Fit the staple cartridges