1 TROUBLESHOOTING FOR THE HARDWARE

12 Close the lower cover of the Saddle Stitch Finisher. Test stapling starts automatically.

Test stapling is necessary to prevent void stapling. Note that the test stapling starts automatically when the two requirements in step 11 are met with the lower cover of the Saddle Stitch Finisher closed. If the test stapling does not start, make sure to check the two requirements again. Then open and again close the lower cover of the Saddle Stitch Finisher.

36 Clearing a Staple Jam

Page 38
Image 38
Toshiba 655, 855, 755, 555 manual Clearing a Staple Jam