Toshiba G8000 operation manual Do not transport, move, store, or place the UPS on its side

caution

DO NOT transport, move, store, or place the UPS on its side.

Forces due to heavy components inside may damage the UPS.

Avoid vibration or shock exceeding 0.5G.

Failing to observe this precaution may cause damage to the UPS.

DO NOT allow the UPS to suffer shock or impact when unpacking.

Tools used to remove packaging materials may cause damage to the UPS.

DO NOT push or pull on the sides of the packaging.or the UPS to move it. Always use a crane, forklift, or pallet jack for transporting and positioning the UPS.

Pushing/pulling on the sides of the unit to move it may result in damage to the UPS. See Figure 4.1 Exterior Handling label.

Fig. 4.1 Exterior Handling label

Do�not�push�or pull�from�sides

SIDE � BACK

BY CRANE:

-�Cables�should�have�sufficient�rating and�equal�length. -�Keep�UPS�leveled�when�lifting/lowering and�avoid�impacts.

BY FORKLIFT:

-�Verify�forklift�maximum�load�capacity. Do�not�push�or -�Ensure�that�the�forks�are�long�enough pull�from�sides to�support�the�UPS�and�are�inserted

properly.

-�Do�not�swing�or�tilt�the�UPS��when lifting�and/or�transporting.

See�manual�for�complete�details.

FORKS (4�Ft.�Minimum�length)

WARNING:

Risk�of�tipping. For�safe�handling,�lift UPS from�back�and�sides�only�(as�shown�above)

G8000 Series with Isolated Output Installation and Operation Manual