Toshiba GA-1120 setup guide Large Capacity Feeder

4 Select each option according to the configuration of the GA-1120/GA-1130 printer and click on [OK].

Copier Type

This sets whether or not the Automatic Duplexing Unit is installed. Color-MFP- Select this when the Automatic Duplexing Unit is not installed.

Color-MFP-ADU- Select this when the Automatic Duplexing Unit (MD-5007) is installed.

Large Capacity Feeder

This sets whether or not the Large Capacity Feeder is installed.

Not Installed - Select this when the Large Capacity Feeder is not installed.

Installed - Select this when the Large Capacity Feeder (MP-1503LT or MP-1503A4) is installed.

Sorter and Stapler

This sets whether or not the Finisher is installed.

Not Installed - Select this when the Finisher is not installed.

Finisher with Saddle Stitcher - Select this when the Finisher with Saddle Stitcher (MJ- 1020) is installed.

Finisher with Stapler - Select this when the Finisher with Stapler (MJ-1019) is installed.

Punch Option

This sets whether or not the hole punch unit is installed. This can be selected when “Finisher withe Saddle Stitcher” or “Finisher with Stapler” is selected at “Sorter and Stapler”.

Not Installed - Select this when no hole punch unit is installed.

2 hole Punch Unit - Select this when the 2 Hole Punch Unit (MJ-6002E) is installed. 2/3 hole Punch Unit - Select this when the 2/3 Hole Punch Unit (MJ-6002N) is installed.

4 hole Punch Unit (F) - Select this when the 4 Hole Punch Unit (F) (MJ-6002F) is installed. 4 hole Punch Unit (S) - Select this when the 4 Hole Punch Unit (S) (MJ-6002S) is installed.

58