SETUP FLOW
After completing each procedure, please mark the checkbox ( 
) in front of each procedure so that you can make sure completed each step for setup.
Setup Flow for Windows
For SMB Printing
Connecting the GA-1120/GA-1130
Connect the
REFERENCE
▼CONFIGURATION GUIDE ▼Chapter 1: Connecting to the Network
➤Connecting network cable to the
Setting up TCP/IP
Configure the TCP/IP Setup options to assign the IP Address, Subnet Mask, and Gateway Address on the
REFERENCE
▼CONFIGURATION GUIDE
▼Chapter 4: Performing Setup from the Control Panel
▼Network Setup options
▼Protocol Setup options
➤TCP/IP Setup options
Setting up the Printing Service
Configure the Windows Print Sharing to enable the Windows Printing Service from Fiery WebSetup or Command WorkStation.
REFERENCE
▼CONFIGURATION GUIDE
▼Chapter 5: Setting up the
▼Network Setup
➤Windows Print Sharing (SMB)
4
