3. READ (X) AND RESET (Z) REPORTS |
3.3 Report Samples
3.3.22DP and Financial GT Read and GT Reset
OPERATION
Control Lock: X for read, Z for reset 200 [AT/TL]
NOTES: 1. Printing will be cancelled by depressing the [C] key during report print.
2.The different DP Report will be printed in each conditions below; when Department and PLU Sales Ratio on Reports is not programmed in Print Item on Reports Setting, and when Department and PLU Sales Ratio on Reports is programmed in Print Item on Reports Setting. However, the Financial Report will be completely same in these conditions.
| ),1$1&,$/5(3257 |
|
| When Department and PLU Sales Ratio on | |||||
When Department*7= | and PLU Sales Ratio on |
| |||||||
Reports is NOT programmed in Print Item on |
| Reports is programmed in Print Item on | |||||||
Reports Setting | = |
|
| Reports Setting*7=),1$1&,$/5(3257= |
| ||||
| 727$/ |
|
| ||||||
|
|
|
| '(37 |
|
| |||
67 | *3 |
|
|
|
| ||||
|
|
| |||||||
|
|
|
| ||||||
| *3 |
|
|
|
|
| |||
67 | DP Report | 67'(37*3 |
| ||||||
|
|
|
| ||||||
'(37 |
|
|
| ||||||
| '(37*3 |
| |||||||
|
|
|
|
| 67 |
| |||
|
|
|
|
|
|