4. PROGRAMMING OPERATIONS EO1-11149
4.23 Tare Table Setting (Submode 56)
4-32
4.23 Tare Table Setting (Submode 56)
In 4.7 PLU Table Programming (Submode 4), some of Scale-compulsory PLUs may be set with a
Tare Table Number. The actual Tare Weight is set to each Tare Table here.
Anytime outside a sale
Control Lock: SET
56 [#/NS] |Tare Table No.| [#/NS] |Tare Weight| [AT/TL] [#/NS]
NOTE: In the lowest digit of the Tare Weight (gram), only the value “0” or “5” can be set.
Example) To set Tare Table No. 1 with Tare Weight 0.13 LB:
Key Operation: Control Lock: SET, Enter 56 and depress the [#/NS] key.
[1] [#/NS] (Tare Table No. 1)
[1] [3] [AT/TL] (Tare Weight)
[#/NS] (To complete this submode.)
4.24 General Unit Weight Setting (Submode 57)
General Unit Weight can be set here so that the Unit Weight may be effect ive to scale it em s ent ered
through departments or PLUs without any individual Unit Weight designation.
Anytime outside a sale
Control Lock: SET
57 [#/NS] |General Unit Weight Code| [AT/TL] [#/NS]
OPERATION
CONDITION
1 digit (1 to 9) X to 999X (gram) or 0 to 999 (LB)
(Unit: 1/100 LB or gram
Example: Enter 13 for 0.13 LB.)
Repeat for another table.
OPERATION
CONDITION
1 to 11
(Refer to General Unit Weight Code Table below.)
Example) To set General Unit Weight Code 2:
Key Operation:
Control Lock: SET,
Enter 57 and depress the [#/NS] key.
[2] [AT/TL]
[#/NS]
General Unit Weight Code Table
Code LB unit Kg unit
1 1 LB 1 Kg
2 2 LB 2 Kg
3 3 LB 3 Kg
4 4 LB 4 Kg
5 5 LB 5 Kg
6 6 LB 6 Kg
7 7 LB 7 Kg
8 8 LB 8 Kg
9 9 LB 9 Kg
10 1/2 LB 100 g
11 1/4 LB ---