4. PROGRAMMING OPERATIONS EO1-11149
4.15 Function Key (Combination Key) Setting (Submode 34)
4-25
4.15 Function Key (Combination Key) Setting (Submode 34) A string of key opeartions can be set on each FUNCTION key ([FUNCTION 1] to [FUNCTION 10]).
Using such programmed [FUNCTION] keys, the operator can eliminate time in various routine
operation procedures. (Up to 10 strokes of key operations can be set to each [FUNCTION] key.)
Anytime outside a sale
Control Lock: SET
34 [#/NS] [FUNCTION] [KEY]………[KEY] [FUNCTION] [#/NS]
NOTES: 1. To delete a string of key operations once set on a FUNCTION key, operate as follows.
34
[#/NS] [FUNCTION] [FUNCTION] [#/NS]
2. Neither [C], [RF], [JF] nor [FUNCTION] keys can be set in a string of keys in the setting
operation above.
3. The [FUNCTION] key should be set beforehand. For details, please contact your TOSHIBA
TEC representative.
Example) To set the following key operation as [FUNCTION 1] key:
100 [DEPT 1] [ST] [AT/TL]
Key Operation: Control Lock: SET, Enter 34 and depress the [#/NS] key.
[FUNCTION 1]
[1] [0] [0] [DEPT 1] [ST] [AT/TL]
[FUNCTION 1]
[#/NS]
OPERATION
CONDITION
Depress one of the
[FUNCTION] keys.
(FUNCTION 1 to
FUNCTION 10)
Depress the keys to be
contained in the key string.
(Max. 10 strokes)
Repeat for other FUNCTION keys.
Depress the same
FUNCTION key that
was depressed at the
declaration.
Same key
Repeatable for other FUNCTION keys
whose string of keys are to be deleted.