4. PROGRAMMING OPERATIONS EO1-11149
4.4 Store Message and Commercial Message Programming (Submode 1)
4- 6
4.4 Store Message and Commercial Message Programming (Submode 1)
Store Message and Commercial Message to be printed as receipt header can be programmed here.
Anytime outside a sale
Control Lock: SET
01 [#/NS] |Line No.| [#/NS]
Character Entries [AT/TL] [#/NS]
NOTES: 1. For each line, up to 24 regular-sized characters or 12 double-sized characters can be
entered. Also a combination of both types can be entered.
2. If incorrect characters are programmed, depress the [C] key to clear all characters on a line
and then re-enter characters from the beginning, or end the line with the [AT/TL] key and
reprogram the entire line. The new data will be active.
3. When all the lines have been programmed, do a check by issuing a receipt. Only the lines
with errors requires to be re-programmed. Other lines will not be affected.
4. When blanks are entered for the whole one line, it causes one line space.
Example)
To program the following Store Message and Commercial Message
Max. 24 characters/line
(See 4.2 Character Entry
Method.
)
2 digits (01 to 07)
(See
NOTE 2
below.)
(For sequentially programming lines,
the Line Number specification can be
skipped.)
Repeat for other lines.
Complete this
line. Complete this
programming
operation.
Line No. 1
Line No. 2
Line No. 3
Line No. 4
Line No. 5
Line No. 6
Line No. 7
1 3 4 3 P E A C H D R I V E
P H O N E : 8 7 - 6 4 3 7
O p e n 8 : 0 0 a m t o 7 : 0 0 p m
C l o s e d : e v e r y W e d n e s d a y
T E C S T O R E
OPERATION
CONDITION