13. SPECIFICATIONS EO1-11149
13. SPECIFICATIONS
13- 1
13. SPECIFICATIONS Item Description
Size 410 mm (width) x 430 mm (depth) x 335 mm (height) (height including
rubber feet)
Weight 12.5 kg
Power Requirement: AC 117V±10%, 60 Hz±10%, 0.46A
Ambient Temperature 0°C to 34°C
Relative Humidity 10% to 80% (No condensation)
Memory Protection Long lasting rechargeable lithium battery is provided.
Paper Width 57.5±0.5mm
Outer Roll Diameter Max. ∅80mm
Thermal paper rolled with the print side facing outside. Paper Type
Only paper rolled onto a core is acceptable, however, the paper end
should not be pasted to the core.
Recommended paper type: KF50 (KANZAN)
TF50KS-E2C (Nippon Paper Industries)
P-350 (KSP)
CAUTION!
Use only paper which meets specified requirements. Use of non-specified paper may shorten the
head life of the printer, resulting in problems with print quality, cause a paper feed failure or shorten
the cutter life. All paper should be handled with care to avoid any damage to the paper. Read the
following guideline carefully.
• Do not store the paper for longer than the manufacturer’s recommended shelf life.
• Store the paper in a cool, dry place. Avoid areas where they would be exposed to direct sunlight,
high temperature, high humidity, dust or gas.
• A contact of chemical or oil may discolour or erase the printed record.
• Rubbing the paper hard with nail or hard object may discolour the paper.
• The paper end should not be pasted to the core.
For further information please contact your authorised TOSHIBA TEC representative or authorised
paper manufacturer.