9. REGISTERING PROCEDURE AND PRINT FORMAT |
9.14 Urgent PLU Maintenance
9.14Urgent PLU Maintenance
This operation is intended to enter a PLU item not existing in the PLU file.
OPERATION |
|
| |
PLU Entry Operation | Error Message | Depress [C] to cancel | |
is displayed. | the error status. | ||
|
[PLU ADD]
See NOTE 3 below.
⏐Source code or
⏐PLU Code⏐ [PLU]
Barcode scanning
⏐Unit Price⏐ [DEPT] [DEPT]
Link Department PLU Maintenance
Designation End
NOTES: 1. The PLU item entered in this operation is automatically added to the PLU ADDITIONAL FILE, not to the main memory. The PLU status follows that of the linked department. The PLUs added to the PLU ADDITIONAL FILE are merged and sorted when a Maintenanced PLU report is taken. (Refer to Manager’s Guide, Section 3.3.20.)
2.The price registered in this operation is assigned to Price 1.
3.To temporarily add PLUs outside a sale transaction, start with this step.
4.Maximum of 30 PLUs can be added to the PLU ADDITIONAL FILE. To add more than 30 PLUs, it is necessary to take a Maintenanced PLU report to merge.
5.The PLU item entered through the scale will be programmed as a Scale PLU.
9.15HI-CONE PLUs
The
If so programmed, the operation patterns for one item entry are as follows.
NOTE: The Repeat Entry is unavailable in this operation.
OPERATION
(1)To enter one individual item in the package (one unpacked item): Open Whole Package Price
1[SPLIT PRICE] Whole Package Price[PRICE]
Whole Package Price[PLU Preset-code Key]
of
Whole Package Price Barcode scanning
Preset Whole Package Price
1 [SPLIT PRICE]
of
[PLU
of preset
Barcode scanning