
9. REGISTERING PROCEDURE AND PRINT FORMAT |
9.54 Remote Slip Printer (Hardware Option) Operation
9.54Remote Slip Printer (Hardware Option) Operation
The Remote Slip Printer may be connected to the
1.The remote slip printer will automatically activate printing when the slip has properly been set to the printer table.
2.The following are selective status programmable relating to the remote slip printer. Ask the store manager and mark the status selected for your store.
•Remote Slip Print in “REG” mode
•Code No. (Cheque No.) Entry Before [CHECK NO.] key at Endorsement Print (Refer to ENDORSEMENT PRINT operation already stated.)
•Print selection by [CHECK NO.] key
9.55When a Power Failure Occurs ...
If a power failure occurs, all sales data stored in the memory are automatically protected by the battery installed in the ECR. As the power returns, the register revives to continue the work and displays the last item entered before the power failure.