9. REGISTERING PROCEDURE AND PRINT FORMAT EO1-11149
9.6 PLU Entry (Manual PLU Code Entry)
9- 5
9.6 PLU Entry (Manual PLU Code Entry) Each PLU is pre-programmed as the “PRESET” type (with a price programmed) or “OPEN” type (with
no price programmed). Perform operation depending on the type selected.
Preset PLU entry
PLU Code [PLU]
[PLU Preset-Code Key] of Preset-PLU
Open PLU entry
Price [PRICE]Open-PLU Code [PLU]
Price [PRICE] [PLU Preset-Code Key] of Open-PLU
NOTE: When a PLU is preprogrammed with HALO (High Amount Limit)/LALO (Low Amount Limit),
depressing the [LC OPEN] key will release these limits.
Three different prices can be programmed for each PLU.
[PRICE 1] PLU Entry
[PRICE 2] PLU Entry
[PRICE 3] PLU Entry
NOTE: Either of the following features can be selected by the program option.
• The price shift operation is effective only for the next PLU entry. After the PLU entry, the price
of that PLU automatically returns to the 1st price.
• Or, the selected price keeps effective until other PRICE key is depressed.
When a barcode scanner is connected, a PLU entry can be done by simply scanning the barcode. It is
true in any operation pattern relating to PLU entries (Repeat, Quantity Extension, etc.)
Basic Operation Sequence:
Scan the barcode on the required item (instead of PLU Code [PLU]). A short tone sounds when the
barcode is successfully scanned.
Manual Entry:
When entering a source code or in-store code manually instead of bar code scanning, the [EAN] key is
pressed.
|Source code or In-store code| [EAN]
This entry is useful, when the PLU item entry should always be followed by another PLU item sale.
Linked PLU is automatically registered together with entered PLU.
OPERATION
OPERATION