FILE NO.
9-3-2. How to Cancel the Auto Restart Function
To cancel auto restart function, proceed as follows :
Repeat the setting procedure : the unit receives the signal and beeps three times.
The unit will be required to be turned on with the remote controller after the main power supply is turned off.
• When the system is on stand-by (not operating)
Operation |
| Motions |
Press [RESET] button for more than | The unit is on standby. |
|
three seconds. (Less than 10 seconds) | ↓ |
|
|
| |
| The unit starts to operate. | The green indicator is on. |
↓After approx. three seconds,
The unit beeps three times and continues to operate.
If the unit is not required to operate at this time, press [RESET] button once more or use the remote controller to turn it off.
RESET button
• When the system is operating
Operation |
| Motions |
Press [RESET] button for more than | The unit is in operation. | The green indicator is on. |
three seconds. (Less than 10 seconds) | ↓ |
|
|
| |
| The unit stops operating. | The green indicator is turned off. |
↓After approx. three seconds, The unit beeps three times.
If the unit is required to operate at this time, press [RESET] button once more or use the remote controller to turn it on.
RESET button
9-3-3. Power Failure During Timer Operation
When the unit is turned off because of power failure during timer operation, the timer operation is can- celled. In that case, set the timer operation again.
NOTE :
The Everyday Timer is reset while a command signal can be received from the remote controller even if it stopped due to a power failure.
– 42 –