FILE NO.
9-4-3. Name and Functions of Indications on Remote Controller
[Display]
All indications, except for the clock time indicator, are displayed by pressing the button.
1.Transmission mark
This transmission mark indicates when the remote controller transmits signals to the indoor unit.
2.Mode indicator
Indicates the current operation mode.
(AUTO : Automatic control, A : Auto changeover
control, : Cool, : Dry, : Heat)
3.Temperature indicator
Indicates the temperature setting. (17°C to 30°C)
4.FAN speed indicator
Indicates the selected fan speed. AUTO or five fan speed levels
(LOW , LOW+ , MED , MED+ ,
HIGH |
|
|
|
|
| ) can be shown. |
|
|
|
|
Indicates AUTO when the operating mode is either AUTO or : Dry.
5.TIMER and clock time indicator
The time setting for timer operation or the clock time is indicated.
The current time is always indicated except during TIMER operation.
6.Hi-POWER indicator
Indicates when the
Press the
7. (PRESET) indicator
Flashes for 3 seconds when the PRESET button is pressed during operation.
The mark is shown when holding down the button for more than 3 seconds while the mark is flashing.
Press another button to turn off the mark.
8.ECO indicator
Indicates when the ECO is in activated.
Press the ECO button to start and press it again to stop operation.
9.A, B change indicator remote controller
| 9 |
|
|
1 | 12 | 2 | 13 |
|
|
10
11
85
64
3 7
When the remote controller switching function is set, “B” appears in the remote controller display. (When the remote controller setting is “A”, there is no indication at this position.)
10. Comfort sleep
Indicates when comfort sleep is activaled. Press comfort sleep button to selectter
11. Quiet
Indicates when quiet is activated.
Press quiet button to start and press it again to stop operation.
12. One-Touch
Indicates when one touch comfort is activated. Press
13. Swing
Indicates when louver is swing.
Press swing button to start the swing operation and press it again to stop the swing operation.
– 46 –