Toshiba RAS-10SAV-A, RAS-10SAV-E, RAS-10SKV-A, RAS-10SKV-E 12-3-1.Outdoor Unit, No, Remarks, Part name, Procedures, Attachment, Detachment, 1. Detachment, 2. Attachment

FILE NO. SVM-07008

12-3-1. Outdoor Unit

No.	Part name	Procedures		Remarks
1	Common	1. Detachment		Upper cabinet
	procedure	1) Stop operation of the air conditioner, and
		turn off the main switch and breaker of the		Wiring cover
		air conditioner.
		2) Remove the valve cover. (ST1T∅	4 x 10s	Valve cover
		1 pc)
		• After removing screw, remove the valve
		cover pulling it downward.
		3) Remove the wiring cover (ST1T∅	4 x 10s 2
		pcs.), and then remove the power cord,
		connecting cable, and cord clamp
		(ST2T∅ 4 x 16s 3 pcs.).

4)Remove the upper cabinet. (ST1T∅ 4 x 10s 5 pcs.)

•After removing screws, remove the upper cabinet pulling it upward.

2.	Attachment	Upper cabinet
1)	Attach the upper cabinet.
	(ST1T∅ 4 x 10s 5 pcs.)

•Hook the rear side of the upper cabinet to the claw of the rear cabinet, and then place it on the front cabinet.

	2)	After connecting the power cord and
		connecting cable, attach the cord clamp
		and wiring cover.
		• Insert the upper part into the upper
		cabinet, and insert the claw which has
		been hooked to the lower part into the
		square hole, and then fix it with screw.
		(ST1T∅ 4 x 10s 1 pc.)
	3)	Attach the valve cover. (ST1T∅ 4 x 10s 1 pc.)
		• Insert the upper part to the upper
		cabinet, set the hook claw of the valve
		cover to square holes (at three
		positions) of the main unit, and attach it
		pushing upward.
2 Front cabinet	1.	Detachment
	1)	Perform work of item 1 of 1.
	2)	Remove upper screw (ST1T∅4 x 10s 4 pcs.)
		of the front cabinet, and lower screws
		(ST1T∅ 4 x 10s 8 pcs.) of the front cabinet.
		• Both side of front cabinet envelop the
		unit, so remove it by pulling sideward.

2. Attachment

1)Assemble front cabinet to the unit.

2)Attach the removed screws to the original positions.

– 83 –