FILE NO.
For dehumidification, a moderate cooling performance is controlled automatically.
1.Press MODE : Select Dry .
2.Press MODE : Set the desired temperature.
5.To automatically control room temperature and airflow for faster cooling or heating operation (except in DRY and FAN ONLY mode)
Press
To automatically control room to save energy (except in DRY and FAN ONLY mode)
Press ECO : Start and stop the operation.
Note: Cooling operation; the set temperature will increase automatically 1 degree/ hour for 2 hours (maximum 2 degrees increase). For heating operation the set temperature will decrease.
7.TEMPORARY OPERATIONIn case of the misplaced or discharged remote control
∙Pressing the RESET button, the unit can start or stop without using the remote control.
∙Operation mode is set on AUTOMATIC operation, preset temperature is 24°C and fan operation is automatic speed.
8.TIMER OPERATION
|
| Setting the ON Timer |
| Setting the OFF Timer | |
1 | Press | ON | : Set the desired ON timer. | Press | OFF : Set the desired OFF timer. |
|
|
|
|
|
|
2 | Press | SET | : Set the timer. | Press | SET : Set the timer. |
3 | Press | CLR | : Cancel the timer. | Press | CLR |
Everyday timer allows the user to set both the ON & OFF timers and will be activated on a daily basis.
Setting Everyday Timer1 | Press | ON | : Set the ON timer. | 3 | Press | SET | . |
|
| ||||||
|
|
|
|
|
|
| |
2 | Press | OFF | : Set the OFF timer. | 4 | Press | SET button during the ( or ) | |
|
|
|
|
| mark | flashing. |
∙During the every day timer is activation, both arrows ( or ) are indicated.
Note:
∙Keep the remote control in accessible transmission to the indoor unit; otherwise, the time lag of up to 15 minutes will occur.
∙The setting will be saved for the next same operation.
– 44 –