TP-Link TL-ER604W Incoming SPI, AH Authentication Key-In, ESP Authentication Key-In, Outgoing SPI

Status:	Activate or inactivate the entry.
 Manual Mode
IPsec Proposal:	Select the IPsec Proposal. Only one proposal can be selected
	on Manual mode. You need to first create the IPsec Proposal.
Incoming SPI:	Specify the Incoming SPI (Security Parameter Index) manually.
	The Incoming SPI here must match the Outgoing SPI value at
	the other end of the tunnel, and vice versa.
AH Authentication Key-In:	Specify the inbound AH Authentication Key manually if AH
	protocol is used in the corresponding IPsec Proposal. The
	inbound key here must match the outbound AH authentication
	key at the other end of the tunnel, and vice versa.
ESP Authentication Key-In:	Specify the inbound ESP Authentication Key manually if ESP
	protocol is used in the corresponding IPsec Proposal. The
	inbound key here must match the outbound ESP authentication
	key at the other end of the tunnel, and vice versa.
ESP Encryption: Key-In:	Specify the inbound ESP Encryption Key manually if ESP
	protocol is used in the corresponding IPsec Proposal. The
	inbound key here must match the outbound ESP encryption key
	at the other end of the tunnel, and vice versa.
Outgoing SPI:	Specify the Outgoing SPI (Security Parameter Index) manually.
	The Outgoing SPI here must match the Incoming SPI value at
	the other end of the tunnel, and vice versa.
AH Authentication Key-Out:	Specify the outbound AH Authentication Key manually if AH
	protocol is used in the corresponding IPsec Proposal. The
	outbound key here must match the inbound AH authentication
	key at the other end of the tunnel, and vice versa.
ESP Authentication Key-Out:	Specify the outbound ESP Authentication Key manually if ESP
	protocol is used in the corresponding IPsec Proposal. The
	outbound key here must match the inbound ESP authentication
	key at the other end of the tunnel, and vice versa.
	-97-