It is recommended to check all the options. You should import the IP and MAC address of the host to
When suffered ARP attack, the correct ARP information will be sent to the device suffering attack initiatively by GARP (Gratuitous ARP) packets, thus the error ARP information of the device will be replaced. You can set the packets sending rate in the Interval field.
With the box before Enable ARP Logs checked, the Router will send ARP logs to the specified server. The IP address of server is the Server IP set on 3.8.7 Logs.
IP-MAC Binding
IP Address: | Enter the IP Address to be bound. |
MAC Address: Enter the MAC Address corresponding to the IP Address.
Description:Give a description for the entry.
Status: | Activate or inactivate the entry. |
List of Rules
You can view the information of the entries and edit them by the Action buttons.
The first entry in Figure
Note:
If all the entries in the binding list are disabled and “Permit the packets of
3.5.1.2ARP Scanning
ARP Scanning feature enables the Router to scan the IP address and corresponding MAC address and display them on the List of Scanning Result.
Choose the menu Firewall→Anti ARP Spoofing→ARP Scanning to load the following page.
