Choose the menu Wireless→Wireless Setting→WDS to load the following page.
Figure 3-26 WDS Configuration
General
WDS: | Enable or disable the WDS function. With this function, the Router can |
| bridge two or more WLANs. |
Scan: | Click this button; you can search the AP which runs in the current |
| channel. |
Parameter
SSID(to be bridged): The SSID of the AP your Router is going to connect to as a client. You
can also use the search function to select the SSID to join.
BSSID(to be bridged): | The BSSID of the AP your Router is going to connect to as a client. You |
| can also use the search function to select the BSSID to join. |
Key Type: | This option should be chosen according to the AP's security |
| configuration. It is recommended that the security type is the same as |
| your AP's security type |
WEP Key Index: | This option should be chosen if the key type is WEP (ASCII) or WEP |
| (HEX).It indicates the index of the WEP key. |
Auth Type: | This option should be chosen if the key type is WEP (ASCII) or WEP |
| (HEX).It indicates the authorization type of the Root AP. |
|
