4 LAN, 4.1 LAN, Dhcp | TP-Link TL-ER604W specification

Note:

To ensure the BigPond connection re-established normally, please restart the connection at least 5 seconds after the connection is off.

3.1.4 LAN

3.1.4.1LAN

On this page, you can configure the parameters for LAN port of this router.

Choose the menu Network→LAN→LAN to load the following page.

Figure 3-13 LAN

The following items are displayed on this screen:

LAN

IP Address:Enter the LAN IP address of the Router. 192.168.0.1 is the default IP address. The Hosts in LAN can access the Router via this IP address. It can be changed according to your network.

Subnet Mask: Enter the Subnet Mask. The default subnet mask is 255.255.255.0.

Note:

If the LAN IP address is changed, you must use the new IP address to log into the Router. To guarantee a normal communication, be sure to set the Gateway address and the Subnet Mask of the Hosts on the LAN to the new LAN IP address and the Subnet Mask of the Router.

3.1.4.2DHCP

The Router with its DHCP (Dynamic Host Configuration Protocol) server enabled can automatically assign an IP address to the computers in the local area network.

Choose the menu Network→LAN→DHCP to load the following page.

-27-

Image 32

TP-Link TL-ER604W manual 4 LAN, 4.1 LAN, Dhcp

Contents

TL-ER604W Copyright & Trademarks FCC Statement Contents III Hardware Specifications 148 Application 130149 Glossary 151 Package Contents Symbol Description Intended ReadersConventions Overview of this Guide Overview of the Router Features Security WirelessTraffic Control Appearance Front Panel LEDs Status Indication Rear Panel Status System ModeNetwork Page WAN Mode  NAT Mode Non-NAT Mode  Classic Mode  WAN Mode 3.2 WAN1Tips Static IP WAN Static IP Following items are displayed on this screen  Static IP Dynamic IP  Dynamic IPConnection Type Host Name Get IP Address by UnicastUse the following DNS Server PPPoE WAN PPPoE Password Active ModeSettings Keep Alive Account Name Service Name ISP AddressSecondary Connection Subnet Address Gateway Address L2TP  L2TP Settings 10 WAN L2TP Following items are displayed on this screen Connection Default GatewaySecondary  L2TP Status Pptp  Pptp Settings Server IP Internet connection by the Connect or Disconnect  Pptp Status BigPond  BigPond Settings 12 WAN Bigpond Following items are displayed on this screen  BigPond Status ISP Dhcp 4 LAN4.1 LAN  Dhcp Settings  Dhcp Reservation Dhcp ClientDhcp Reservation MAC Address  List of Reserved AddressSet the MAC Address for LAN port Set the MAC Address for WAN port Switch Statistics MAC Address Port Port Mirror  Statistics Enable Port Mirror ModeMirroring Port Mirrored Port  Rate Control Rate ControlApplication Example Port Config  Port Config  Port Vlan Port StatusPort Vlan Wireless Wireless SettingWireless Setting  Wireless Setting  Wireless Parameter Description Ssid BroadcastAP Isolation Security WPA/WPA2 WEP Hexadecimal and Ascii formats are Multi-SSIDKey Format  Multi-SSID Config  General Enable/Disable Guest Network Encryption Group Key Auth Type 1.3 WDS  List of Group Scan  ParameterBSSIDto be bridged Key Type Wireless Advanced  Wireless AdvancedKey ： Short GI MAC Filtering  Rule List Host Status Filtering Rules  Host Status User GroupGroup User  Group Config User Config  View Config View List of User View 1 NAT NAT SetupAdvanced One-to-One NAT  One-to-One NAT  Multi-Nets NAT Multi-Nets NAT List of Rules Configuration procedure Application Example Network Requirements Virtual Server Protocol  Virtual ServerInterface Port Triggering  Port Triggering 1.6 ALG 38 ALG Following items are displayed on this screen Setup Traffic Control323 ALG IPsec ALG Control Control all the timeLimited Upstream Bandwidth Control Limited Bandwidth Session LimitSession Limit Session List  List of Session Limit Policy Routing ConfigurationLoad Balance WAN Link Backup 45 Link Backup Following items are displayed on this screen WAN Config ProtocolTiming Failover Routing Static Route Protocol  List of Protocol 47 Static Route Following items are displayed on this screen  Static Route 5.2 RIP 48 RIP Following items are displayed on this screen  List of RIP Route Table IP-MAC Binding FirewallAnti ARP Spoofing ARP Scanning  IP-MAC Binding ARP List Attack Defense Enable Attack Flood DefensePacket Anomaly Defense Access Control MAC FilteringURL Filtering  MAC Filtering  URL Filtering Rule Object Access Rules Web Filtering  Access Rules ServicePolicy Source Service Group on 3.3.1 GroupDestination Priority  Service  List of ServiceName Dest. Port App Control Control Rules Control Rules Application VPN Database 1 IKE IKE Policy 62 IKE Policy Following items are displayed on this screen  IKE Policy IKE Proposal 63 IKE Proposal Following items are displayed on this screen  IKE Proposal  List of IKE Proposal IPsecIPsec Policy Local Subnet  IPsec PolicyPolicy Name Policy Mode Remote SubnetRemote Gateway IKE Policy AH Authentication Key-In ESP Authentication Key-InAH Authentication Key-Out ESP Authentication Key-Out  IPsec Proposal IPsec Proposal List of IPsec Policy IPsec  List of IPsec Proposal IPsec SA Protocol Media Tunnel Length of Header Authentication3 L2TP/PPTP 3.1 L2TP/PPTP Tunnel  L2TP/PPTP Tunnel Tunnel Max ConnectionsL2TP/PPTP Server Pre-shard Key  List of Configurations IP Address PoolList of L2TP/PPTP Tunnel  IP Address Pool General ServicesPPPoE Server 70 General Following items are displayed on this screen IP Address Pool Account  AccountIP Address Assigned Static IP Address  List of Account Is 48. If Enable Advanced Account Features is not selected,Exceptional IP  Exceptional IP BulletinList of Account Title Interval E-Bulletin  List of E-Bulletin Dynamic DNSPublisher DynDNS  Dyndns Ddns  No-IP Ddns No-IP List of DynDNS Account  PeanutHull Ddns PeanutHull List of No-IP Account Comexe  List of PeanutHull Account  List of Comexe Account UPnP Comexe Ddns Maintenance Admin SetupAdministrator  List of UPnP Mapping Login Parameter  Administrator Remote Management  Remote Management  List of Subnet Factory DefaultsManagement Reboot  Configuration VersionExport and Import  Export Firmware Upgrade License Statistics Interface Traffic Statistics Interface Traffic Statistics 123 IP Traffic Statistics  Advanced WAN Information Diagnostics Diagnostics Traffic Statistics  IP Traffic Statistics  Tracert Online Detection Ping Time PingDNS Lookup Port Displays the detected WAN port Detection Logs  Config  List of LogsSeverity Send System Logs Application Network Requirements System Mode Network Topology ConfigurationsInternet Setting System Mode Internet Connection VPN Setting IKE SettingSettings IPsec VPN  IKE Policy IKE1 IPsec Setting  IPsec Proposal  IPsec Policy PFS DH1 Pptp VPN Setting  IP Address Pool  L2TP/PPTP Tunnel Network Management User Group Group  User App Control  View Enable Bandwidth Control 11 App Rules Bandwidth Control Rule LAN WAN1 Scan and import the entries to ARP List Network SecurityLAN ARP Defense Set Attack Defense WAN ARP DefenseSet IP-MAC Binding Entry Manually Attack Defense 20 Attack Defense 145 Traffic Monitoring StatisticsPage Appendix a Hardware Specifications Environmental and Physical Appendix B FAQ Page Appendix C Glossary Glossary Description Allows dissimilar communication devices to communicate Port or device that connects to a LAN. Other devices Enterprise