
SSID: | Enter a name for the wireless network. The same name of SSID(Service |
| Set Identification) must be assigned to all wireless device in your network. |
| Considering your wireless network security, the default SSID is set to be |
| |
| Router’s MAC address). This value is |
| NOT the same as test. |
Description: | Enter the description for the SSID. |
SSID Broadcast: | Enable or disable the SSID Broadcast. When wireless clients survey the |
| local area for wireless networks to associate with, they will detect the SSID |
| broadcast by the Router. If the SSID Broadcast is enabled, the Wireless |
| Router will broadcast its name (SSID) on the air. |
AP Isolation | Enable or disable the AP Isolation. This function can isolate wireless |
| stations on your network from each other. Wireless devices will be able to |
| communicate with the Router but not with each other. |
Security: | Specify the security option of the wireless network. If you do not want to use |
| wireless security, select “Disable Security”, otherwise select one Security |
| option from the |
| the security options to enable security. |
| There are three wireless security options supported by the Router: |
| |
| |
| The detail information of the three security options will be introduced below. |
1)WPA-PSK/WPA2-PSK
It’s the WPA/WPA2 authentication type based on