data via this port. The IP address of next hop is 116.10.1.254 and the hop count is 1. The effective time of this entry is 1 second.
Note:
●RIP function cannot be set if the Router is in NAT Mode. To set RIP function, please change the System Mode to Routing or Full Mode.
●The RIP function of WAN port takes effects only when the Connection Type of this WAN port is Static IP.
3.4.5.3Route Table
This page displays the information of the system route table.
Choose the menu Advanced→Routing→Route Table to load the following page.
Figure 3-49 RIP
The following items are displayed on this screen:
Route Table
Destination: | The Destination of route entry. |
Gateway: | The Gateway of route entry. |
Flags: | The Flags of route entry. The Flags describe certain characteristics of the |
| route. |
Logical Interface: | The logical interface of route entry. |
Physical | The physical interface of route entry. |
Interface: |
|
Metric | The Metric of route entry. |
